My 2012 Project

Talk about or show off your custom modifications.
crwright3
Hang Around
Posts: 4
Joined: February 12th, 2012, 5:54 pm

Re: My 2012 Project

Postby crwright3 » February 17th, 2012, 10:05 pm

the air fillter is under the gas tank mounted on the carb, a very nice upgrade.

User avatar
MSteele
Hang Around
Posts: 18
Joined: March 8th, 2011, 1:25 pm
Location: Columbus, GA
Contact:

Re: My 2012 Project

Postby MSteele » February 18th, 2012, 3:38 am

woah. that IS a nice up.
-M Steele
Recursive; adj., See recursive.

User avatar
avinaftel
Prospect
Posts: 268
Joined: March 21st, 2011, 12:05 am
Location: Tempe, AZ
Contact:

Re: My 2012 Project

Postby avinaftel » February 18th, 2012, 10:09 am

MSteele wrote:New handle bars (3" sweep) + risers , header wrap, foot pegs, shifter, brake pedal. mirrors and headlamp were put on the bike last year.

Next project will be to replace the airbox with something flat... like a shield. I was thinking of a forward facing pipe, but couldnt find anything that fit without hours of customization.

Image

Image

Image

Image

Image



Nice look. Today I'm removing the air filter for a bare jug look. I'm installing new jets from MotorcycleCarbs.com and a Uni Filter under the tank. Wraps for the stock exhaust will come from bluecollarbobbers.com, as well as their light bar. After taking in the costs and effort of making and home made light bar, I find its not too much more to get the great looking one from blue collar bobbers. Love the wrapped look though, and maybe I won't burn my heel as much......

User avatar
BottleCap
Prospect
Posts: 325
Joined: March 12th, 2011, 12:07 am

Re: My 2012 Project

Postby BottleCap » February 22nd, 2012, 9:16 pm

Are those bicycle pedals?
Driving a 2005 C50 enginecycle.

User avatar
kettlinton
Hang Around
Posts: 28
Joined: December 27th, 2008, 11:44 am
Location: Alexandria,Va

Re: My 2012 Project

Postby kettlinton » March 2nd, 2012, 8:32 pm

MSteele wrote:New handle bars (3" sweep) + risers , header wrap, foot pegs, shifter, brake pedal. mirrors and headlamp were put on the bike last year.

Next project will be to replace the airbox with something flat... like a shield. I was thinking of a forward facing pipe, but couldnt find anything that fit without hours of customization.

Image

Image

Image

Image

Image
Sweet!

locolobo13
Hang Around
Posts: 8
Joined: April 21st, 2011, 10:22 am
Location: Norfolk, Va.

Re: My 2012 Project

Postby locolobo13 » April 19th, 2012, 10:29 am

Sweet!!! [CLAP] Where did you get those bars and risers, I've been looking ones like that, but can't find anything around here.
'03 VL800
'09 Yamaha FZ6R

User avatar
Doc
Site Admin
Posts: 2856
Joined: March 10th, 2008, 7:50 pm
Location: Virginia, Troy
Contact:

Re: My 2012 Project

Postby Doc » April 19th, 2012, 11:28 am

The risers appear to be Aeromach, painted or powder coated. The bars looks like a standard set of drag bars.. You should be able to get them just about anywhere.


Return to “My Custom Mods”

Who is online

Users browsing this forum: No registered users and 4 guests